shivamagroind

Calcium Glycine Chelate, Calcium Glycinate and Calcium Bisglycinate: How to Read Supplier Terminology

A practical guide to matching calcium glycinate and calcium bisglycinate quotes, technical data sheets and certificates of analysis before approval.

Shivam Agro Industries Published 7 min read Share WhatsAppLinkedIn

A buyer sends an enquiry for Calcium Glycine Chelate and gets two documents back. The quote reads “Calcium Glycine, 25 kg bag.” The technical data sheet attached to it is titled “Calcium Bisglycinate.” The names look related, but the buyer still needs to confirm that both documents refer to the same product code, grade and specification.

This illustrative enquiry runs through the article, from quote to technical data sheet to the lot specific certificate of analysis. Ingredient buyers and QA teams reviewing the calcium glycinate listed by Shivam Agro Industries can follow the same sequence, starting from the information the company publishes.

Calcium Glycine Chelate Trade Names and Supplier Shorthand

The names in this enquiry fall into three patterns, and each one tells the buyer something different about what remains to be checked. The first is shorthand. “Calcium glycine,” as written on the example quote, names two components and little else. The longer trade name, Calcium Glycine Chelate, adds that the two are chelated but still leaves the structure undefined.

The second is variation in spelling and pairing. The example data sheet writes calcium bisglycinate as one word, while the two word form “Calcium Bis Glycinate” is the same name spelled differently. Shivam Agro Industries presents both common names together, listing its material as Calcium Bisglycinate (Calcium Glycinate), which helps a buyer recognise either name when reviewing documents.

The third is wording that implies a more specific identity. The “bis” prefix suggests two glycine units for each calcium ion, and calcium bisglycinate chelate adds a claim about how they are bonded. Calcium amino acid chelate moves in the opposite direction: it describes a category and does not name glycine as the ligand.

No name in any of these patterns fixes the molecular formula, ligand ratio, purity or grade, so each one works as a prompt for questions rather than a description of the material. A name tells the buyer which details to confirm, and the specification and test results answer them.

A simple control helps here. Keep a name log in each supplier file that records every trade name the supplier has used against the product code it was later confirmed to mean. The next quote that arrives in shorthand can then be checked against a known mapping.

Matching a Calcium Glycinate Quote to the Technical Data Sheet

Back to the enquiry. The buyer places the quote and the technical data sheet side by side and reads them field by field, looking for a shared reference rather than a similar name. Every entry below is a placeholder and is not attributed to any supplier.

Document Illustrative entry Buyer checkpoint
Supplier quote Product: Calcium Glycine; Pack: 25 kg bag; Product code: not stated Whether a product code or specification reference is given
Technical data sheet Title: Calcium Bisglycinate; Product code: [TDS product code]; Grade: not stated Whether a grade designation is listed against the code
Technical data sheet footer Revision: Rev. [X], dated [date] Whether this revision is current and was the basis of the price

The comparison settles one point. Because the quote omits the product code, the similar name on the data sheet cannot link the two documents. A supplier with more than one calcium product, or one product in several grades, could issue the same quote against any of them.

The buyer therefore confirms the match through a corrected quote or a signed statement showing that the quoted item is [TDS product code] supplied against Rev. [X]. Every later check depends on this link, because without it the identity, grade and assay reviews could be applied to the wrong specification.

The revision date deserves a second look. If the data sheet revision is newer than the quote, a limit may have changed after the price was set. The buyer should confirm which revision the price was calculated against, so the commercial and technical documents refer to the same version.

Need a quote or a test report?Tell us the product and quantity. We reply the same day.

Confirming Calcium Bisglycinate Ingredient Identity and Grade

With the product code confirmed, the buyer reviews identity and grade as separate fields. One document can settle the first and leave the second open, so recording each field on its own shows clearly which question has been answered and which still needs a response.

Identity covers what the material is: the declared ingredient name, any chemical description and the composition statement. If the specification describes a blend, a carrier or an added flow agent, the buyer records it exactly as stated and does not assume the balance is calcium bisglycinate.

It is also worth confirming which test, if any, the specification relies on to verify identity. A calcium and nitrogen result describes composition rather than structure, so a named identity test gives the buyer firmer evidence that the material matches its declared name.

Grade covers what the material is suitable for. In the example, the data sheet names the ingredient but leaves the grade field empty. Because a name does not state the end use, the buyer requests a grade declaration that names the intended application and refers to the confirmed product code.

For its Calcium Bisglycinate (Calcium Glycinate), Shivam Agro Industries publishes appearance, solubility, calcium content, total nitrogen and moisture, giving buyers a clear starting point for this review. The grade for a specific application can be confirmed directly with the company.

Reading the Elemental Calcium Assay on a Calcium Glycinate Certificate of Analysis

The first lot arrives with a certificate of analysis, and its calcium line reads Elemental calcium: [result] [unit]; reporting basis: [as received or dry basis]. Each placeholder matters, because the result, its unit and its stated basis have to be read together before the number means anything.

Before reading the number, the buyer confirms that the certificate belongs to this delivery. The product code must match [TDS product code], and the lot number must match the container labels and dispatch documents. A certificate carrying a different lot number describes another batch.

Next comes the comparison with the specification limit, which is valid only when both use the same reporting basis. A dry basis minimum cannot be judged against an as received result unless the moisture value is reported and the conversion is agreed with the supplier.

Units and method need the same attention. A result in mg/g must be converted before it is read against a limit in percent, and the test method named on the certificate should be the one the specification cites. Precision deserves the same check, since a result and a limit stated to different decimal places can suggest a pass or fail that is not real.

The limit and the result also need to be kept apart. The specification minimum is the lowest acceptable value for any lot, while the certificate reports what was actually measured in this lot. Only the second describes the material in the delivery.

Shivam Agro Industries lists a calcium content of 12% minimum for its Calcium Bisglycinate (Calcium Glycinate). This published minimum is the reference point for lot results, and the company can confirm the applicable reporting basis and test method for the comparison.

The elemental calcium result shows how much calcium is present on the stated basis. On its own, it does not establish ingredient identity, grade, chelated fraction or compound purity, which is why the identity and grade fields reviewed earlier remain separate decisions.

About Shivam Agro Industries and Its Calcium Glycine Chelate Range

Shivam Agro Industries is a manufacturer, exporter and supplier located at Ranasan G.I.D.C., Vijapur, in Mehsana district, Gujarat. Its calcium chelate is listed as Calcium Bisglycinate (Calcium Glycinate), alongside zinc, magnesium, manganese, copper and ferrous bisglycinate and glycine itself.

Conclusion: Resolving Calcium Glycine Chelate Quote Discrepancies

The quote and certificate now match the confirmed product code, which resolves the naming discrepancy that started the review. QA can assess the calcium result once it has the applicable limit and reporting basis. Approval for the intended application remains pending because the grade has not been confirmed.

When contacting Shivam Agro Industries about its calcium bisglycinate, include the name used on the quote, any product code or specification reference, and the intended application. These details allow the company to identify the listed material and respond on the grade question that keeps approval pending.

Calcium BisglycinateSee specifications and request a sample
View product

Request a quote

Leave your details and our team will call you back.

Written by Shivam Agro Industries

Manufacturer and supplier of industrial chemicals.

Need help choosing a grade or supplier?Chat with us on WhatsApp: +91 98254 65361