During a morning preparation run, an operator adds Chromium Glycinate from a newly received lot to the mixing vessel using the plant’s standard procedure. Where the previous lot would already be dispersed, powder is still visible on the vessel wall, and the operator logs the time.
The previous lot is CG0417 and the new lot CG0521; both codes and all results below are hypothetical. The log entry is an observation, not a confirmed specification failure or supplier change. Testing must show whether the lot, a plant condition or both explain the difference, giving chromium glycine chelate suppliers a factual report.
Retaining Chromium Glycinate Samples from Both Lots
Following the plant’s documented sampling and retention procedure, secure a representative sample of each lot. Label it with the product name, product code, lot number, sampling date, linked production run and source container.
In this case, a CG0521 sample was retained after the affected run, but its source container was not recorded. Note that gap in the investigation file from the start.
Plants buying from multiple chromium glycinate manufacturers should record the supplier name alongside the lot number, because similar product names appear on labels from different sources. Use the name exactly as documented. Shivam Agro Industries, for example, lists Chromium Glycinate and also names chromium bisglycinate in its glycinate series.
Store both samples sealed and apart from production stock until the investigation closes. If no representative CG0417 sample remains, a direct comparison is not possible, and earlier production records reflect only the conditions of those runs. Record that limitation at the outset.
Repeating the Chromium Glycinate Bench Test Under Identical Conditions
Prepare both samples with the same documented preparation procedure and the same product addition rate. Hold the water source, water volume, temperature, mixing setup, addition sequence and observation times constant, and where possible use one analyst in one session.
Fix the endpoint before the first run so results are not judged after the fact. “Takes longer to disperse” needs a set meaning, such as the time at which no undispersed powder is visible on the surface, wall or base of the vessel at the agreed observation points.
Across three paired repeats, CG0521 reached the endpoint later than CG0417 each time. A difference that holds in the same direction under identical conditions is reproducible at bench scale and justifies further work, though it says nothing yet about the reason.
Matching results would not have closed the case either. A bench setup may miss whatever was present in the production run, which would leave the original event unexplained.
Isolating Water and Process Variables in Chromium Glycinate Preparation
Once the difference is shown to be repeatable, change one condition at a time and keep every other setting at its bench value. Run each comparison as a separate set of trials so that no result reflects two changes.
Water comes first. Confirm whether representative water samples from both production runs were retained. Here, only the CG0521 run had one, so the earlier water was rebuilt from the plant’s water records and labelled as a reconstruction. Each lot was then prepared in each water.
The second comparison tests one documented process difference. The batch record shows the powder was added faster in the affected run than in earlier runs, so both lots were compared at the earlier and the faster rate.
| Variable changed | Conditions held constant | Observation to record | What the result can support |
|---|---|---|---|
| Water: retained sample from the CG0521 run versus reconstructed water for the CG0417 run | Lot pair, volume, temperature, mixing setup, addition rate and sequence, observation times | Time to the defined endpoint for each lot in each water | Whether water contributes, limited by the reconstruction |
| Powder addition rate: earlier rate versus the faster recorded rate | Lot pair, water, volume, temperature, mixing setup, addition sequence, observation times | Time to the defined endpoint for each lot at each rate | Whether the rate affects both lots or only one |
When a condition shifts both lots alike, it points to a process effect. When only the new lot responds, the finding is a possible interaction between that lot and the condition, not a confirmed cause.
Neither water condition widened the gap in the bench comparison. The earlier run’s water was reconstructed, so the trial could not rule out a water effect in production.
The faster rate lengthened the CG0521 time and left CG0417 largely unchanged, so the team logged a possible interaction. These results describe this investigation, not a general preparation method.
Reviewing Chromium Glycinate Packaging and Storage Records
The bench cannot recreate how material was handled before it reached the vessel. For each lot, compare packaging condition at receipt, seal status, opening dates, storage history and any transfers between containers or areas, and separate documented facts from gaps.
Receiving records show both lots arrived with intact seals. The CG0521 container used in the affected run, however, was opened two days earlier, with no record of how it was resealed or where it was kept.
That gap leaves a stretch of handling that neither the bench work nor the records can describe. It does not prove storage caused the change; it means storage can be neither confirmed nor excluded.
Because the retained CG0521 sample’s source container is unknown, the bench result may or may not reflect the opened container. Confirm whether any dispensing or transfer record identifies it.
Documenting Chromium Glycinate Lot Findings for Supplier Review
The report should let the supplier examine one defined discrepancy without the full investigation file. Head it with the documented product name, product code, both lot numbers, the affected run and the observation date. Cite the bench comparison by record number and attach handling records as references.
Confirmed findings: CG0521 dispersed slowly in the affected run and reached the defined endpoint later than CG0417 in every paired bench repeat. Only CG0521 slowed further at the faster addition rate, and neither water condition widened the gap, although the reconstructed earlier water leaves a production water effect possible.
Open points: The records do not show how the opened CG0521 container was resealed and held, or which container supplied the retained sample. The cause of the difference between the lots therefore remains unknown.
What to confirm with the supplier: Confirm whether CG0417 and CG0521 were supplied against the same specification revision, and whether any documented change between them is relevant to the finding. Also confirm whether the lot documentation covers a parameter linked to dispersion behaviour.
About Shivam Agro Industries and Its Chromium Glycinate Product
Shivam Agro Industries is a Gujarat based manufacturer, exporter and wholesale supplier of EDTA chemicals and glycine chelated micronutrients, located at Ranasan G.I.D.C., Vijapur, Mehsana. Alongside Chromium Glycinate, its main products include EDTA Disodium, EDTA Tetrasodium, Zinc Bisglycinate, Ferrous Bisglycinate and Glycine.
Conclusion: Deciding the Next Step After a Chromium Glycinate Lot Change
If the trials had shown a repeatable process effect shifting both lots alike, the next step would be an internal review of that effect before any production setting changed. An adjustment made without that review could hide the effect in later runs.
Here the retained samples behaved differently in the paired bench tests, and the cause remains unresolved. The team retains both lot samples, the water sample and the handling records under its documented material review process, sends the report to the supplier and leaves production settings unchanged until that review concludes.
Working this way keeps a single observation from being treated as a verdict on the material. Buyers can use the published Chromium Glycinate specification as a reference and contact Shivam Agro Industries to confirm which documentation applies to the lot under review.

